3 installing the air locker, Profiling the seal housing tube, 1 a low-pinion differentials – ARB RD136 User Manual
Page 22
Advertising
3 Installing the Air Locker
20
3.8
Profiling the Seal Housing Tube
3.8.1
A
Low-pinion Differentials
With the seal housing tube now firmly secured into the bulkhead
fitting, bend the tube so that it closely follows the profile of the
differential. (Figs.13.,14., & 15.)
Check that the contour of the tube will not interfere with the bearing
caps, the Air Locker, the ring gear or the axle housing. Ensure at
least 8mm (5/16”) clearance between the seal housing tube and the
Air Locker.
Figure 13.
Figure 14.
Advertising