3 installing the air locker, 2 b high-pinion differentials – ARB RD136 User Manual
Page 24
Advertising
3 Installing the Air Locker
22
3.8.2
B
High-pinion Differentials
With the seal housing tube now firmly secured into the bulkhead
fitting, bend the tube so that it closely follows the profile of the
differential. (Figs.16., 17., & 18.)
Check that the contour of the tube will not interfere with the bearing
caps, the Air Locker, the ring gear or the axle housing. Ensure at
least 8mm (5/16”) clearance between the seal housing tube and the
Air Locker.
Figure 16.
Figure 17.
Advertising