ARB 3438110 User Manual
Warning
15/07/03
Page 1 of 4
3782649
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA:(08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190
NISSAN XTERRA (USA) WINCH BULL BAR 97 ON
No 3438110
WARNING
THIS BULL BAR MUST NOT BE FITTED TO AIRBAG EQUIPPED VEHICLES.
FITMENT TO AIRBAG EQUIPPED VEHICLES MAY INTERFERE WITH THE
PROPER OPERATION OF THE AIRBAGS AND MAY RESULT IN SERIOUS INJURY.
TAKE NOTE OF THE FOLLOWING:
• THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS USING ONLY THE
HARDWARE SUPPLIED.
• IN THE EVENT OF DAMAGE TO ANY BULL BAR COMPONENT, CONTACT YOUR NEAREST
AUTHORISED ARB STOCKIST. REPAIRS OR MODIFICATIONS TO THE IMPACT ABSORPTION SYSTEM
MUST NOT BE ATTEMPED.
• DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL, OTHER THAN THOSE SPECIFIED
BY ARB.
• DO NOT REMOVE LABELS FROM THIS BULL BAR.
• THIS PRODUCT OR IT’S FIXING MUST NOT BE MODIFIED IN ANY WAY.
FITTING KIT No 6171371
6151040
4
BOLT M10 X 30 X 1.25mm
4581048
4
WASHER SPRING M10 X 1/8” X 1/8” ZP
4581040
8
WASHER FLAT 3/8” X 1” X 16”
3751581
1
BRKT CONTROL BOX
6151180
2
BOLT M6 X 20mm
EG50
1
RUBBER GROMMET
3751595
1
BRKT NUMBER PLATE
6151017
8
BOLT M6 X 16 X 1mm HEX
6151128
10
NUT M6 FLANGE
6151046
10
WASHER FLAT 6mmZP
6151100
2
BOLT 1 ½” UNC X ½”
6151138
2
NUT UNC ½” ZP
4581007
4
WASHER FLAT 13mm x 40mm HD
4581050
2
WASHER SPRING ½” X 1/8” X 1/8” ZP
6151110
2
BOLT 5/8" x 6" UNC
6151140
2
NUT NYLOC 5/8" UNC
4581051
4
WASHER FLAT 5/8"
3500080
1
INDICATOR KIT AND LOOM
TOOLS REQUIRED
Basic tool kit, drill with 12mm drill bit