ARB 3434050 - Manual (Page 3)

9/10/01 Page 3 of 9 3782892
1. 1. Remove the bumper bar and grill.
2. Spray paint the vehicles cross member and
radiator lower support panels with matt black
spray paint on both sides.
3. Assemble the mounts to the vehicle as shown
in the pictures 7 & 8. Fasten bolts finger tight
only.
M10 x 30mm bolts, flat washers, spring washers
and nuts.
2. M12 x 25mm bolts, flat washers and spring
washers.
3. 4. Using a 12mm drill bit, drill through the two slot
holes at the front into the chassis cross
member.