ARB 3434050 User Manual
Page 9
9/10/01
Page 9 of 9
3782892
19.
26. Next step is to lock pin the bar so there is no
movement by drilling a 10mm hole on both
sides of vehicle, and fasten with 10mm x 25mm
bolts plus 10mm hardware.
20.
(If fitting with winch)
27. Feed the winch cable through the roller fair
lead. Mount the hook to the end of the cable.
(If fitting with winch)
Connect the winch control box cables to the winch motor. Refer to the Warn handbook for additional
information. Connect the long winch + & - cables to the vehicle after the bar is installed.
Refer to the Warn winch manual for vehicle wiring instructions.
Ensure that these cables are installed well clear of sharp, hot or moving objects. Secure the
winch cables to the vehicle and winch bumper with the supplied cable ties.