ARB 3450110 - Manual (Page 11)

31 10 02 Page 11 of 16 3783013
32 . Fit control box to control box bracket using
original ¼” nuts from control box and
connect power cables to winch motor as per
winch instructions.
33. Cable tie power cables to bar keeping cables
clear from all moving parts.
Optional driving light fitted.
( Viewed from rear of bar )
34. Cable tie power leads to battery, to the left
side of the bar keeping clear of all moving
parts.
( Viewed from rear of bar )
Fasten control box earth to
winch tie rods.