ARB 3450110 - Manual (Page 12)

31 10 02 Page 12 of 16 3783013
35. Position bar in front of vehicle and connect
indicators, fog lights and fit winch cables
under grille into engine bay close to battery.
36. Slide bar onto vehicle mounting system and
secure using 10mm hardware. Align bar with
vehicle grille and flares, and tighten bolts
using socket, extension and uni joint
through fog light aperture in bar. Lastly
retighten mounting system bolts when bar
has been centralized sideways.
37. Once bar is secured to vehicle, using holes in
locking plates as a template, drill 10mm holes
through lower section of bar and bolt up
using 10mm hardware.
38. Fit washer bottle guard bracket to bar
mounting system using 8mm hardware.
.
Fit 6mm hardware to bracket
and guard
Finger tighten