ARB 3450100 User Manual
Page 6
Advertising
7-12-04
Page 6 of 10
3782869
Before
15. Remove the two bolts in the base of the control
box and reposition them into the more
centralised holes
After
16. Place the 4 solenoids over the 2 metal stands that
are facing upwards. Make sure they line up with
the holes in the base.
17. Replace the 2 cap screws, washers and nuts
removed in step 13 above into original holes.
18. Replace the black cover and refit the three cover
screws (DO NOT OVER TIGHTEN)
Advertising