ARB 3462030 - Manual (Page 11)

Last Rev Date: 3/4/06 Page 11 of 12 Fitting instructions# 3783194
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
If fitting with winch
35. With the winch cable through the roller fair
lead. Mount the hook to the end of the cable.
36. Wire up the indicator and clearance lamp
assemblies. Use scotch locks to splice
cables to existing indicator and clearance
lamp wiring and cable tie securely.
NOTE: Refer to the Warn winch manual for
vehicle wiring instructions.
37. Ensure that electrical cables are installed
well clear of sharp, hot or moving objects.
Secure the winch cables to the vehicle and
winch bumper with the supplied cable ties.