Steele Products SP-PB140 - Manual (Page 3)

Dear Customer
If you require any help with your product,
whether it is a Warranty claim, spare part or
user information, please phone our Help Line
888-896-6881 for an immediate response.
Introduction
Your new Steele_Product power tool will more
than satisfy your expectations. It has been
manufactured under stringent Steele® Quality
Standards to meet superior performance criteria.
You will find your new tool easy and safe to
operate, and, with proper care, it will give you
many years of dependable service.
Carefully read through this entire
Instruction Manual before using your new
Steele_Product Power Tool. Take special care to
heed the Cautions and Warnings.Your
Steele_Product power tool has many features that
will make you job faster and easier. Safety
performance and depend ability have been given
top priority to the development of this tool, making
it easy to maintain and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All
tools, hoses and packaging should
be sorted, taken to the local
recycling center and disposed of in
an environmentally safe way.
WARNING .
It may be more difficult to see the
laser line in conditions of bright
sunshine and on certain surfaces.
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
The ‘C’ and ‘US’ indicators adjacent to the
CSA Mark signify that the product has been
evaluated to the applicable CSA and ANSI/UL
Standards, for use in Canada and the U.S.,
respectively.
Specifications
Amp:
2.0
RPM: 2600 ft/min
Throat Depth: 9”
Cutting Capacity: 3-1/2”
Table Size: 11-13/16” x 11-13/16”
Blade Size: 59-1/2”
Bevel Angle: 0° to 45°
Laser class: I
Laser wavelength: 650nm
Laser output power: ≤ 1mW
Bulb: 120V Max 15W E12
Insulation class: I “Earthed Appliance’
Weight: 40.3 lbs
V : volts ~ : alternating current
Hz : hertz nm : nanometers
A : ampere mW : milliwatt
Caution.
3