Steele Products SP-PB140 - Manual (Page 7)

Accessories
The STEELE ® Band Saw is supplied with the
following accessories as standard
• 59 -1/2” band saw blade (fiited)
• Rip Fence
• Miter Gauge
• Light Bulb
• Wrench
• Hex Keys (x2)
• Instruction Manual
• Receipt Holder
Unpacking
Due to modern mass production techniques, it is
unlikely that your STEELE® Power Tool is faulty or
that a part is missing. If you find anything wrong,
do not operate the tool until the parts have been
replaced or the fault has been rectified. Failure to do
so could result in serious personal injury.
AssemblyTime
Assembly consists of attaching the table, table
insert, rip fence and miter gauge. Assembly will
take approximately 10-15 minutes.
RequiredTools
The following tools are required:
• 0.16”(4mm)Hex Key(supplied)
• 0.12”(3mm)Hex Key(supplied)
• Wrench (supplied)
7