Fast & Fluid AT750 - Manual (Page 9)

p9
© Fast & Fluid Management, EuroAT
B - Installing the computer and software
Step 1 - Place and connect computer to
dispenser
>
Place computer and monitor
on top of dispenser module
and the keyboard on the
keyboard on support Connect dispenser con-nector
to COM1 (default) and
mouse, keyboard and other
appliances to design-nated
computer ports.
Step 2 - Install dispenser software on computer
>
Install all necessary software
provided by software
supplier. Check software
manual for details. Use software to test basic
functions of dispenser before
filling.
Check software manual for
testing procedure.