Fast & Fluid TM300 - Manual (Page 11)

Dispensing
>
Place the can at the center of the can table cross
hair. Lift the can table upward (unlock by pressing
down the foot pedal) *dispensers with optional
can lift only. Bring upward as far as possible. This
is the optimal dispensing position.
Ensure can opening is under the dispenser nozzle
and at its optimal height.
Choose desired formula as shown in software
manual. The turntable will subsequently rotate to
correct positions.
Remove can, dispensing is now complete.
Dispensing is mainly a software issue. Please read your software manual
thoroughly for all possible options.
11
Punch hole in Lid - Manual (optional)
Attention! Punch knife is very sharp. Do not hold while punching