Hyline Offroad JK LOUVERED HOOD PANEL - Manual (Page 5)

Step 10 – Install the Hood Louver Panels onto hood and assemble nylon locknuts to threaded studs.
Tighten nuts just enough until they touch the steel hood.
DO NOT OVERTIGHTEN
NUTS. Overtightening will cause distortion on Hood & Louver Panel.
Step 11 - Re-install hood onto vehicle and re-mount u-shape tie down bracket.
Send your OFFROAD pictures to [email protected] . If we choose any one of your pictures
to be used on our website, We send you a FREE Hyline Offroad T-Shirt.
Q:\Hyline Offroad, LLC\Installation Instructions\JK-50HLP\JK-50HLP Installation Instructions.doc
Page 5 of 5
REV 0 8/6/10
Installation instructions provided must be read and followed exactly when installing
product. Failure to do so could potentially result in injury or death of any occupants
in the vehicle. WEAR SEAT BELTS AT ALL TIMES WHEN DRIVING!
Though our products are rugged, they are primarily designed and built to enhance the appearance of the
vehicle and will not protect from death or injury in the event of an accident. Adhere to all vehicle
manufacturers specifications
Attention