PHCC Pro Series Pro Series 1000 Battery Backup Sump Pump System (without silence switch) - Manual

Battery Backup
Sump Pump System
Instruction
Manual
Warning alarms
Push to test
or reset
•
•
•
•
•
The unit is not receiving AC power.
Check plug & circuit breaker or replace charger.
The fluid in the battery is low.
Add distilled water to the battery.
The pump was activated.
Check the main pump for failure.
The charger is charging the battery.
The battery terminals are corroded or the battery is
defective. Clean the terminals or replace the battery.