AEM 30-3433 Series 2 AEMnet Adapter - Manual (Page 5)

Page 5
INSTALLING THE AEMnet ADAPTER HARNESS
4. Table 2 below lists the corresponding CAN1L and CAN1H pin locations for each Series 2
EMS.
CAN1L (Green wire) CAN1H (White wire)
EMS Adapter p/n LOCATION LOCATION
30-6100 30-3433 11A 12A
30-6101 30-3433 11A 12A
Table 2: CAN1L and CAN1H pin locations
Figure 6 below shows the connectors for the Series 2 EMS.
Figure 6: Wire-side view of pinout for 6100 and 6101 EMS
5. To install the harness into the ECU plug, align the CANL and CANH pins into the
receptacle of the plug and push in until it clicks as shown in figure 7:
Figure 7: Pushing pin into ECU plug