2GIG POTS MODULE - Manual

INSTALL INSTRUCTIONS
These instructions are written for use when installing a 2GIG‐GC POTS Module into a 2GIG Control
Panel.
Box Contents
• POTS Module
• Install Instructions
INSTALLING
1 Remove the back plate of the Control Panel. The following figure shows the back of the
Control Panel without a POTS Module installed.
2 Match the 7 x2 pin set and the 2 white mounting clips on the back of the POTS Module to the
open pin set and 2 holes on the back of the Control Panel.
3 Push the POTS Module gently down onto the Control Panel until it snaps into place.
POTS MODULE