Apple Studio Display - Manual (Page 61)

Tips and Troubleshooting 61
ColorSync profiles are not updated when ColorSync software is installed.
m Profiles created with older versions of ColorSync are still supported with the new version
of ColorSync that came with your software.
m Out-of-date profiles in the ColorSync Profiles folder are not removed automatically. If you
want to remove a ColorSync profile, you must do so manually. For more information
about ColorSync, see Mac OS Help.
Changes in the Monitors & Sound control panel don’t appear on the display.
m Each display connected to your computer has its own Monitors & Sound window. Use the
window that displays the name of your display in the top-left corner.
m Make sure you have installed the Apple Displays Software that came with your display. For
more information, see Chapter 2, “Installing and Using the Apple Displays Software.”
When you open the Monitors & Sound control panel, only one resolution is
available.
m Make sure you’ve connected the ADB connector on the display cable to the ADB port on
your computer. You cannot use many of the features of the Apple Displays Software
without an ADB connection. For more information, see Chapter 1, “Setting Up.”
m If the Apple Displays Software is installed and you start up your computer holding the
Shift key down, the Display Enabler extension will not load and the software will not run.
Restart your computer without disabling extensions to use the software.
m Reinstall the software that came with your display. For more information, see Chapter 2,
“Installing and Using the Apple Displays Software.”