Apple PowerBook Duo Dock (including Duo Dock II) - Manual (Page 10)

5.
Now connect any other equipment you have, such as an exter
nal har
d disk drive or printer
.
Fo
llow the instr
uctions that came with the equipment.
If you are connecting a S
C
SI device, you’ll need an HDI-30
SC
SI System Cable to attach it to the dock. See the section on
using S
C
SI devices in this chapter for complete infor
mation
about connecting such equipment to your P
owerBook Duo
System.
6.
If you will be using network services, connect your LocalT
alk (or other network) cable.
Fo
llow the instr
uctions that came with the cable, or check
with your network administrator
. If you will be connecting
your Duo Dock II (or upgraded Duo Dock) to an Ether
net
network, you need to connect the dock to the Ether
net
network and check that your P
owerBook Duo has the cor
rect
networking sof
tware. See “Using your Duo Dock on an
EtherT
alk Network” later in this guide.
Once you have connected all your equipment, the Duo Dock is ready to use.
6