Apple PowerBook Duo Dock (including Duo Dock II) - Manual (Page 29)

5.
Loosen the two scr
ews connecting the central part of
the dock to the base. (In the r
est of these instr
uctions,
the central part of the dock is called the
subassembly
.)
Check the screws to deter
mine whether they are slot or
Philips screws and then select the appropriate screwdriver
.
Tu
rn
the screws counterclockwise. The screws don
’t come out
all the way
, so you can
’t remove them completely
.
6.
Pull the subassembly towar
d you until you feel it come
to a stop. It will move only a short distance. Y
ou’ll be able to feel a small
gap under the front ledge of the dock. If the subassembly doesn
’t seem to move, or if you can
’t feel a
gap under the front ledge, the screws may not be loose enough. T
ur
n them a few more times and tr
y again.
The subassembly is heavy
, so before you continue with step 7,
mak
e sure that you have enough room to put it down nearby af
ter
you lif
t it off the base.
continues
.
Screws
25