Muting and soloing channel strips, Enabling track channel strips for recording – Apple Soundtrack Pro 2 User Manual

Page 280

Advertising
background image

280

Chapter 8

Basic Mixing in Soundtrack Pro

Note: You can create submixes independently of the audio hardware connected to your
computer and can route audio to an output that does not correspond to a physical
output. In most situations, each submix in a project should correspond to a physical
output on the audio interface or other hardware connected to your computer. Submixes
that do not correspond to a physical output will not be heard. You may set as many
submixes in a project to the same physical output device or output channel as you like.

To select an audio interface as the output device:

m

Choose Apple menu > System Preferences, click Sound, then click the Output button.
Select the audio interface in the list that appears.

For more information about these settings, see “

Setting the Audio Input and Output

”

on page 22.

Muting and Soloing Channel Strips

You can mute and solo channel strips in the Mixer in order to hear or silence specific
tracks, busses, or submixes.

To mute a channel strip:

m

Click the channel strip’s Mute button. Click the button again to unmute the channel strip.

To solo a channel strip:

m

Click the channel strip’s Solo button. Click the button again to unsolo the channel strip.

To exclusively solo a channel strip:

m

Option-click the Solo button. Click the Solo button again to unsolo the track, bus, or output.

When you export a project, all unmuted tracks, busses, and submixes are included in
the exported file. If you export a track, bus, or output that is muted (including being
muted by having another track soloed), the exported file contains no audio.

Enabling Track Channel Strips for Recording

You can enable a track channel strip for recording. When you enable a track channel
strip for recording, audio will be recorded on the track when you click the Record
button in the transport controls. You can’t record to a bus or output channel strip.

To enable a track channel strip for recording:

m

Click the Arm for Recording button in the channel strip. Click the button again to
disable the channel strip for recording.

You can record only to a track, not to a bus or an output.

Solo button

Mute button

Arm for Recording

button

Bypass Effects button

Advertising