Blaupunkt NASHVILLE DAB47 - Manual (Page 26)

82
Traffi c information
Your device is equipped with an RDS-EON
receiver. EON stands for
Enhanced Other
Network.
Whenever a traffi c announcement (TA) is
broadcast, the system switches automati-
cally from a station that does not provide
traffi c reports to the appropriate traffi c in-
formation station within the broadcasting
network that does.
Once the traffi c report has been played, the
system will switch back to the programme
that you were listening to before.
DAB-FM traffi c information
source
If traffi c information priority is activated,
the device automatically switches to an in-
coming traffi c announcement being broad-
cast via DAB within a DAB broadcasting
network (in DAB mode) or via FM (in radio
mode, see RDS-EON). In AUX, SD/MMC,
CD/MP3 and CD-changer mode, you will
hear traffi c announcements played from
the source that was active last (either DAB
or radio).
Switching traffi c information
priority on/off
Press the TRAF button
8.
The priority for traffi c announcements is ac-
tivated if the display shows the traffi c jam
symbol.
Notes:
You will hear a warning beep:
If you leave the reception area of a
traffi c information station that you
are currently listening to.
u
•
If, while listening to a CD/MP3, SD/
MMC or a CD in the changer, you leave
the reception area of a traffi c informa-
tion station that the system is tuned
into and the subsequent automatic
search cannot fi nd a new traffi c infor-
mation station.
If you retune the radio from a traffi c
information station to a station that
does not broadcast traffi c informa-
tion.
If you hear the warning beep, you can ei-
ther switch off traffi c information priority
or tune into a station that broadcasts traffi c
information.
Setting the volume for traffi c
announcements
Press the MENU•OK button
7.
Press the or button
6 repeatedly
until “VOLUME MENU” appears on the
display.
Press the MENU•OK button
7 to dis-
play the volume menu.
Press the or button
6 repeat-
edly until “TRAFFIC” appears on the
display.
Adjust the volume using the but-
tons
6.
Press the MENU•OK button
7 and
then the DIS•ESC button
5 to exit the
menu.
Notes:
Using the volume control
3, you can
also adjust the volume during a traf-
fi c announcement for the duration of
that announcement.
•
•
u
u
u
u
u
u
•
Traffi c information
02_NashvilleDAB47_gb.indd 82 02_NashvilleDAB47_gb.indd 82 20.07.2007 11:48:21 Uhr 20.07.2007 11:48:21 Uhr