Blaupunkt NASHVILLE DAB47 - Manual (Page 28)

84
You must not hinder or assist the drive as it
draws in the CD.
Gently close the control panel whilst
exerting a little pressure until you feel
it click into place.
The CD starts playing.
If a CD is already inserted in the drive,
press the SRC button
< repeatedly
until “CD” appears on the display.
Playback begins from the point at which it
was last interrupted.
Selecting tracks
Press one of the arrow buttons
6 to
select the next or previous track.
If you press the or button
6 once, the
player will play the current track again from
the beginning.
Fast track selection
To quickly select tracks backwards or for-
wards,
press and hold down one of the /
buttons
6 until fast-reverse/fast-for-
ward track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
press and hold down one of the
buttons
6 until fast searching back-
wards / forwards begins.
u
u
u
u
u
Random track play (MIX)
Press the 1 MIX button
:.
“MIX CD ON” appears briefl y on the dis-
play and the MIX symbol is displayed. The
next randomly selected track will then be
played.
Cancelling MIX
Press the 1 MIX button
: again.
“MIX CD OFF” appears briefl y on the display
and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefl y play) all the tracks on
the CD.
Press and hold down the MENU•OK
button
7 for longer than two seconds.
The next track will then be scanned.
Note:
You can set the scanning time. For
further information, please read the
section entitled “Setting the scanning
time” in the “Radio mode” chapter.
Cancelling SCAN and continuing
listening to a track
To end the scanning process,
press MENU•OK button
7.
The currently scanned track will then con-
tinue to be played normally.
u
u
u
u
CD mode
02_NashvilleDAB47_gb.indd 84 02_NashvilleDAB47_gb.indd 84 20.07.2007 11:48:22 Uhr 20.07.2007 11:48:22 Uhr