Apple Setting Up Your Power Macintosh G4 (PCI & AGP) - Manual (Page 28)

28 Chapter 2
Note: The maximum number of drives that can function in the lower drive bays is two ATA
drives or three SCSI drives.
For technical information about the power requirements for devices the computer can
accommodate, see the electronic documentation that came with the computer.
The following table shows the type, number, and height of drives that fit on the carrier in
each drive bay. (A drive already occupies at least one of these positions.)
CD-ROM/DVD-ROM/DVD-RAM drive bay Zip drive bay (Zip drive is optional)
Drive position 3: Accommodates
two 3.5" ATA hard disk drives
(maximum 1" high), or a single
SCSI drive (maximum 1.6" high).
Drive position 2: Accommodates a
3.5" SCSI hard disk drive
(maximum 1.6" high).
Drive position 1:
Accommodates a 3.5" SCSI
hard disk drive (maximum 1.6" high).
Position 1 (front) Position 2 (middle) Position 3 (rear)
SCSI: One 1.0-inch (25.4
mm) or 1.6-inch (40.6
mm) drive SCSI: One 1.0-inch (25.4
mm) or 1.6-inch (40.6
mm) drive SCSI: One 1.0-inch (25.4 mm) drive; or
one 1.6-inch (40.6 mm) drive
ATA: One or two 1.0-inch (25.4 mm)
drives