Apple Power Macintosh 4400 - Manual (Page 116)

How to verify and test a disk
The Drive Setup and Disk First Aid applications are used to verify and test
disks. They can be found on the CD-ROM disc that contains system software.
To verify and test a disk, follow these steps:
1 Start up your computer from the CD-ROM disc that contains system software.
See “Starting Up From a CD-ROM Disc” in the section “Initializing a Hard
Disk” later in this chapter.
2 Verify the disk using Disk First Aid.
m Double-click the Disk First Aid icon (you may need to look in a folder
called Disk Tools to find Disk First Aid).
m When the Disk First Aid window appears, click the icon of the disk you
want to verify, then click Verify.
m If any problems are detected, repair them with Disk First Aid following
the instructions in “How to Repair a Hard Disk or Floppy Disk” later in
this chapter.
3 Open the Drive Setup program.
You may need to look in a folder called Disk Tools to find Drive Setup.
116 Chapter 6