Apple Power Macintosh 4400 - Manual (Page 125)

After Disk First Aid starts, follow the instructions on the screen. Disk First
Aid checks your hard disk for any problems.
3 When Disk First Aid has finished checking your hard disk, choose Quit from the
File menu.
4 Open the Drive Setup program.
You use the Drive Setup program to update your hard disk. You may need to
look in a folder called Disk Tools to find Drive Setup.
5 In the list of drives, click your startup disk.
6 Choose Update Driver from the Functions menu.
7 When the update process is finished, quit Drive Setup.
8 Shut down your computer.
9 Start up your computer from the CD-ROM disc that contains system software.
See “Starting Up From a CD-ROM Disc” in the section “Initializing a Hard
Disk” earlier in this chapter.
The Installer’s Welcome screen appears. You may have to double-click the
System Software Installer icon to open the Installer program.
10 Click Continue.
The Easy Install dialog box appears.
125 Troubleshooting
Disk on which
system software
will be installed
Click here to install the
software you need.
Click here to install on
a different disk.