Apple Server Diagnostics - Manual (Page 36)

Using Server Diagnostics Mac OS X
Server Diagnostics Mac OS X changes based on whether you’re running it locally,
as a client, or as a host. In client mode, you can’t change test settings, select
different tests, or shut down or restart the server. Therefore, the test log uses most
of the window.
In local and host mode, you can access all Server Diagnostics Mac OS X features in the
main window.
Local or client IP address Log status Currently viewed log
Detailed status
Test controls
Test Selections list
Test
Test category
Test log
Select All and
Deselect All buttons
For more information about using Server Diagnostics Mac OS X, see the following
sections.
Customizing Server Diagnostics Mac OS X Test Settings
You can customize Server Diagnostics test settings in several ways by choosing which
tests are run, whether to loop tests, and whether to stop or continue testing when an
error occurs.
To customize Server Diagnostics Mac OS X test settings:
1 In Server Diagnostics Mac OS X, select the test settings you want.
36 Chapter 4 Using Server Diagnostics