Apple Power Macintosh 4400 - Manual (Page 100)

3 To close the tray, push the tray in or press the Open/Close button.
Your Macintosh recognizes the CD-ROM disc as a startup disk, and in a few
seconds the desktop below appears.
Now continue with the steps in “Reinstalling Your System Software” or
“Reinstalling All Your Original Software.”
If you see the Macintosh desktop
1 Press the Open/Close button of your CD-ROM drive to open the CD-ROM tray.
2 Place the Macintosh Restore CD in the tray with the disc label facing up.
Make sure the disc is lying flat in the tray.
3 To close the tray, push the tray in or press the Open/Close button.
4 Hold down the C key on your keyboard while you choose Restart from the Special menu
and wait for the message “Welcome to Macintosh” to appear.
100 Chapter 8
Your screen
may look slightly
different from
this one.