Apple IP (AppleShare IP) Gateway - Manual (Page 37)

Note: The process is the same whether the Installer is set for Easy Install or
Custom Install.
The System Disk dialog box appears:
2 Choose a system disk from the pop-up menu.
3 Click OK.
The gateway software will be installed on the designated system disk.
Setting up the gateway
To set up the Apple IP Gateway, you first configure your MacTCP software,
after which you configure the gateway itself.
Configuring MacTCP
You can access the MacTCP control panel from the Gateway Manager or
directly from the Apple (
) menu in the Finder. To access the control panel
from the Gateway Manager:
1 Double-click the Gateway Manager icon to open the program.
The Gateway Manager icon looks like the illustration shown here:
Setting up the gateway 29