Apple IP (AppleShare IP) Gateway User Manual
Page 50
Advertising
Configuring MacTCP for manual addressing
To configure the software for manual addressing:
1
Choose Control Panels from the Apple (
) menu.
The Control Panels window opens.
2
Double-click the MacTCP control panel to open it.
The following window appears:
3
Click the AppleTalk connection icon in the upper-left corner.
The icon indicates the connection method that your computer is currently
using. The connection method is set in the Network control panel, shown in
the following figure, and the MacTCP setting is determined by that setting.
42
Chapter 2 / Installation and Setup
Advertising