Belkin F5D7630-4A - Manual (Page 32)

There are two types of WPA security, WPA-PSK (no server) and WPA (with server).
WPA-PSK uses what is known as a pre-shared key as the security key. A
pre-shared key is basically a password that is between 8 and 40 characters long.
It can be a combination of letters, numbers, or characters. Each client uses the
same key to access the network. Typically, this is the mode that will be used in a
home environment.
WPA (with server) is a system where a radius server distributes the keys to the
clients automatically. This is typically found in a business environment.
Setting WPA-PSK (no server)
1. From the Security Mode drop-down menu, select “WPA-PSK (no server)”.
2. Enter your pre-shared key. This can be from 8 to 40 characters and can be
letters, numbers, or symbols. This same key must be used on all of the clients
that you set up.
3. Click “Apply Changes” to finish. You must now set all clients to match
these settings.
Setting WPA (with server) Settings
If your network uses a radius server to distribute keys to the clients, use this
setting.
UNDERSTANDING THE WEB-BASED USER INTERFACE
30