Lukas SC 357 E2 - Manual (Page 24)

24
ATTENTION!
When cleaning units and equipment, note that no cleaning agent may be used
that has a pH value outside the range 5 - 8!
9.1 General information
9. Repairs
Service work may only be performed by the device manufacturer or by personnel trained by
the device manufacturer and authorized LUKAS dealers.
Only LUKAS spare parts may be used to replace all components (see spare parts list), as
special tools and compliance with, assembly instructions, safety aspects and inspections are
required (see also chapter "Maintenance and Servicing").
During assembly, ensure that all components are particularly clean, as dirt can
damage the rescue equipment!
WARNING / CAUTION / PLEASE NOTE!
Protective clothes must be worn when repairs are being carried out, as the
devices may also be pressurized when not in operation.
ATTENTION!
Because LUKAS rescue devices are designed for highest performance, only
components specifi ed in the spare parts list for the appropriate equipment may
be replaced.
Other components in the device may only be replaced if:
- You have participated in an appropriate LUKAS service training course.
- You have been explicitly granted permission by LUKAS Customer Service
(valid LUKAS certifi cate required!)
NOTE:
Always register your tool on the LUKAS Hydraulik GmbH internet site. This is the
only way to guarantee extended warranty cover.