Lukas SC 357 E2 - Manual (Page 28)

28
4. Remove screw "A1".
Push the hand guard E in the
depicted direction until the safety
bolts F are easily accessible.
9.3.2 Replacing the blades, protective cover and hand grip of the S 311 E2
cutter and SC 357 E2 and SC 250 E2 combination devices
Components to be
replaced
Required work steps
Protective cover 1. - 9. and 10.
Pivot bolt 1., 5. and 10.
Handle 1. - 3. and 10.
Blade 1. - 7. and 10.
Work steps:
1. First of all, carefully clean the rescue equipment.
2. Next, close the blade arms so that the tips are almost touching (see illustration below).
NOTE:
The blade bolts are only accessible when the blade arms are almost touching.
Now proceed as follows:
3. Remove screws "A" from handle "B".
The handle can then be removed.
A
B
NOTE:
The illustrations show the equipment with the blade arms of the cutter tool.
Assembly and disassembly are identical for the combination tool!
E
F
F
A1