Lukas LS 330 Fi - Manual (Page 16)

16
7.4 Pulling (combi tools only)
7.5 Squeezing (combi tools only)
You may only use LUKAS chain sets for pulling purposes.
Before the pulling process can be performed, ensure that the bolt and hook fit correctly to
prevent the chain from slipping.
Only chain sets in perfect condition may be used!
The pull chains are to be inspected at least once per year by an expert!
See separate operating instructions for the relevant LUKAS chain set in order to
correctly attach, affix and use the chain sets.
The connection pieces of the LUKAS
chain sets are affixed to the boreholes
A on the blades using load bolts (see
figure, right).
Chain sets:
for LKS 35 FI: KSV 8
A
Basically, squeezing can only be carried out in the area of the tips (see figure below).
Squeezing area