Lukas LS 330 Fi - Manual (Page 27)

27
12.4 Cutting performance
Cutting material Cutting material dimensions
LS 311 FI LS 330 FI LKS 35 FI
max. max. max.
[mm] [mm] [mm]
[in.] [in.] [in.]
Round material steel
(acc. to EN 13204)
33 33 30
1.30 1.30 1.18
Round material steel
(acc. to NFPA 1936)
33 33 30
1.30 1.30 1.18
12.5 Hydraulic fluid recommendations
Mineral oil DIN ISO 6743-4 for LUKAS hydraulic equipment and others
Oil temperature range Oil code Viscosity rating Remarks
A -20 .... +55°C HM 10 VG 10
Oil temperature range Oil code Viscosity rating Remarks
A -4.0 .... +131°F HM 10 VG 10
recommended viscosity range: 10...200 mm²/s (10…200 cSt.)
Supplied with HM 10 DIN ISO 6743-4.
CAUTION!
Before using hydraulic fluids, which do not correspond to the above-mentioned
specifications and/or are not purchased from LUKAS, you have to contact
LUKAS itself!
12.6 Operating and storage temperature ranges
Operating temperature [°C] -20 … +55
Ambient temperature (device in operation) [°C] -25 … +45
Storage temperature (device not in operation) [°C] -30 … +60
Operating temperature [°F] -4 … +131
Ambient temperature (device in operation) [°F] -13 … +113
Storage temperature (device not in operation) [°F] -22 … +140