Snorkel MX19-sn17564-18099 - Manual (Page 12)

Page 10 Operation Manual
060570-026 MX 15/19 Operation
P A R K I N G B R A K E R E L E A S E
Perform the following procedure only when the machine will not operate under its own power and it is nec-
essary to move the machine, or when winching onto a trailer to transport.
Figure 6: Parking Brake Release
1. To release the brakes, loosen the jam nut and bolt until the
brakes disengage the tires (Figure 6). The machine will now
roll when pushed or pulled.
2. To re-engage the brakes, tighten the bolt until the brakes
have fully engaged the tires. Secure the bolt with the lock-
nut. Verify that the brakes have fully engaged the rear tires
before operating the machine by testing their ability to hold
the machine on a 25% (14°) grade.
W A R N I N G ! !
Never tow faster than 0,3 m/sec. (1 ft./sec.).
Never operate the work platform with the parking brakes released. Serious injury or damage could
result.
A F T E R U S E E A C H D A Y
1. Ensure that the platform is fully lowered.
2. Park the machine on a firm level surface, preferably under cover, secure against vandals, children and
unauthorized operation.
3. Turn the Chassis Key Switch to OFF and remove the key to prevent unauthorized operation.
Brake Release Bolt