Snorkel MX19-sn17564-18099 User Manual
Page 13
Transporting the Work Platform
060570-026 MX 15/19
Operation Manual
Page 11
T
RANSPORTING THE
W
ORK
P
LATFORM
B
Y
C
R A N E
Secure the straps to Tie Down/Lifting D-Rings only.
B
Y
F
O R K L I F T
D A N G E R
!
!
Forklifting is for transport only.
See specifications for weight of work platform and be certain that forklift is of adequate capacity to lift
the work platform.
Both the MX15 and MX19 may be forklifted from the rear end of the machine between the wheels.They
may also be forklifted from the side using the forklift pockets shown in the diagram.
Figure 7:
Transporting the Work Platform
B
Y
T
R U C K
Maneuver the work platform into transport position and chock the wheels. Secure the work platform to the
transport vehicle by attaching chains or straps of adequate load capacity to the Tie Down/Lifting D-Rings.
C A U T I O N
Overtightening of the chains or straps attached to the Tie Down/Lifting D-Rings may result in damage
to work platform.
Forklift
Tie Down/Lifting D-Rings
Located At Each End
Forklift
Pockets