Snorkel X52RT-sn10000+ - Manual (Page 20)

OPERATOR’S MANUAL with Maintenance Information
Maintenance
15
Check the Engine Oil Level
Maintaining the proper engine oil level is
essential to good engine performance and
service life.
Operating the machine with an improper oil
level can damage engine components.
Check the oil level with the
engine off.
1 Release the latches on the engine tray and
fully slide the engine tray out.
2 Check the oil level dipstick. Add oil as
needed.
Perkins 404C-22
Oil Type 5W-30
Oil Type - cold conditions 0W-20
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper level
is essential to machine operation. Improper
hydraulic oil levels can damage hydraulic
components. Daily checks allow the inspector to
identify changes in oil level that might indicate
the presence of hydraulic system problems.
Perform this procedure with the
platform in the stowed position and the engine
off.
1 Visually inspect the sight gauge located on
the side of the hydraulic oil tank.
☉ ☉ ☉ ☉ Result: The hydraulic oil level should be
within the top 5 cm of the sight gauge.
2 Add oil if necessary. Do not overfill.
Hydraulic oil specifications
-18℃～-5℃ 10W
-18℃～99℃ 10W-20,10W-30