Operating instructions, Fall protection, After each use – Snorkel X52RT-sn10000+ User Manual
Page 33

OPERATOR’S MANUAL with Maintenance Information
Operating Instructions
28
The RF outriggers will begin to extend.
Move the right outrigger control switch
down. The RR outriggers will begin to
extend.
7 Move the outrigger extend / retract switch
up to enable the retract function.
8 Move the right outrigger control switch up.
The RF right ahead outriggers will begin to
retract.
Move the right outrigger control switch up.
The RR outriggers will begin to retract.
Outrigger Auxiliary Retract
1 The platform must be in the lowest height.
Operation the machine on the ground
control.
2 Open the ground control gate. Move down
and hold the engine start switch.
3 Move up the outrigger auxiliary retract
switch.
Fall Protection
Personal fall protection equipment (PFPE) is
not required when operating this machine. If
PFPE is required by job site or employer rules,
the following shall apply:
All PFPE must comply with applicable
governmental regulations and must be
inspected and used in accordance with the
manufacturer’s instructions.
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstructions and traffic.
2 Lower the platform.
3 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
4 Chock the wheels.