Snorkel TB37 2001 - Manual (Page 19)

Figure 5.4—LPG Fuel Gauge
The LPG tank is mounted horizontally at the rear of the
turntable. Read the horizontal scale to determine the
fuel level.
Engine Oil
The engine oil level is measured with a dipstick (refer to
Figure 5.5). Oil sump and filter capacities in the engine
specification charts are approximate. The dipstick is the
only way to accurately determine the engine oil level.
The engine oil level should always be between the add
and full marks on the dipstick.
Figure 5.5—Engine Oil Dipstick
The dipstick is visible behind the lower control panel.
Hydraulic Fluid Filter Gauge
The fluid filter gauge (refer to Figure 5.6) is located on
the return line filter on top the reservoir. The reservoir is
behind the door on the right side of the turntable. The
gauge indicates the condition of the filter. When the
needle on the gauge is in the red zone, it is time to
change the filter.
Figure 5.6—Fluid Filter Gauge
Fluid Level and
Temperature Gauge
A gauge on the end of the reservoir displays the level
and temperature of the hydraulic fluid (refer to Figure
5.7).
Figure 5.7—Hydraulic Reservoir
If the temperature rises above 200°F (93°C) stop ma-
chine operation and let the fluid cool before resuming
operation.
page 5 - 2 TB37 – 0172094
Chapter 5. Gauges and Displays
Filter Gauge
Level and Temperature Gauge
Dipstick
Horizontal Scale