After unpacking the display – Barco CORONIS MFGD 3621 User Manual
Page 40
Advertising
![background image](/manuals/55058/40/background.png)
After unpacking the display
40
After unpacking the display
Important:
In the factory, the height-positioning system in the display foot is
blocked with a red clip to prevent damage during transportation.
Before installing the display, you must remove this clip.
Figure 8
To remove the clip:
1.
Position the display with its rear side facing you.
2.
Pull the red clip out of the fixation holes in the foot.
3.
Keep the clip in case the display needs to be shipped later.
Clip
Advertising
This manual is related to the following products: