Barco CORONIS MFGD 3621 - Manual (Page 44)

Power connection
44
Power connection
To connect the power:
Figure 13
Figure 14
1. To get access to the connectors, remove the connector
compartment cover by pulling down the 2 clips at the top of the
cover.
2. Connect the output of the 12V DC power supply to the DC input of
the display.
3. Connect one end of the proper power cable to the AC input of the
12V DC power supply.
4. Connect the other end of the power cord to a grounded power
outlet.
(2)
(3)
(2)