Barco CORONIS MFGD 3621 - Manual (Page 73)

Display operation
73
Display operation
Operating precautions
Continuous operation of the display with the same image may result in
some image sticking on the LCD panel. Over 10 hours operation with the
same image content is not recommended.
Switching on DPMS on display and PC and activating a good screen saver
may decrease the risk of image sticking (image retention).
Stand-by switching
When the display is on and no on-screen display is visible, push and
hold the control wheel at the front for a few seconds to switch the
display in stand-by. The LED turns orange.
Figure 23
When the display is in stand-by, press the control wheel to switch it
back on.
BARCO
Push and hold