Eppendorf PatchMan NP 2 - Manual (Page 12)

57
Home
Move out of working radius and return to the precise same spot.
Axial
Activate or disable axial movement.
Pos 1
Approach stored position.
Store current position by pressing and holding down the key.
Clear approached position by pressing and holding down the key.
Z only
Only up and down movement (Z direction).
Deactivates the X/Y movements.
Standby
Switches the device off or on.
The function is used as a reset function.
Joystick button
Press once to deactivate joystick.
Prevents unwanted movement of the tool.
Press any key to reactivate.
Turn wheel
Setting the speed in the current speed mode.
Turn towards rear to increase speed.
Turn towards front to reduce speed.
Changes by one scale increment are signalled
acoustically.
Z only
Description
3 Description
3
03_Geraet_e.fm Seite 57 Dienstag, 16. August 2005 3:15 15