Eppendorf PatchMan NP 2 - Manual (Page 37)

82
Power supply
Input:
120 – 240 V AC; 50 – 60 Hz; < 50 W
Output: 15 – 18 V DC; 25 W
Control board 15 – 18 V DC; 25 W
Contamination level: II
Overvoltage category: II (IEC 61010-1)
Pollution degree: 2 (IEC 664)
Ambient temperature: max. 40 °C
Ambient relative humidity: max. 80 %
Weights
Control board with power supply:
2.7 kg
Module unit: 1.4 kg, incl. guide
Dimensions
Y/Z module:
120 x 100 x 68 mm
X module: 120 x 60 x 50 mm
Control board: 270 x 205 x 160 mm
Max. travel: > 18 mm (each axis)
Resolution per microstep: approx. 40 nm
Max. tool travel speed: 7,500 µm/s
The device carries the mark.
Technical specifications subject to change!
Technical data
8 Technical data
8
08_TechnDaten_e.fm Seite 82 Dienstag, 16. August 2005 3:21 15