Chassis, Chassis -3, Chassis specifications -3 – JLG 1100SJP Operator Manual User Manual
Page 103
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121255
– JLG Lift –
6-3
Chassis
Table 6-4. Chassis Specifications
Maximum Travel Grade With boom in stowed
position (Gradeability) (1100SJP)
45%
Maximum Travel Grade With boom in stowed
position (Gradeability) (1100S)
30%
Maximum Travel Grade With boom in stowed
position (Side Slope)
5°
Turning Radius - 1100SJP (Axles Retracted)
Outside
Inside
22 ft. 6 in. (6.8 m)
14 ft. 5 in. (4.4 m)
Turning Radius - 1100SJP (Axles Extended)
Inside
Outside
8 ft. (2.4 m)
19 ft. 4 in. (5.9 m)
Turning Radius - 1100S (Axles Retracted)
Outside
Inside
35 ft. 6 in. (10.8 m)
25 ft. 3 in. (7.7 m)
Turning Radius - 1100S (Axles Extended)
Inside
Outside
10 ft. 11 in. (3.33 m)
27 ft. (8.2 m)
Max Tire Load
25,000 lbs. (11,340 kg)
Max Ground Bearing Pressure (1100SJP)
100 psi (7.03 kg/cm
2
)
Max Ground Bearing Pressure (1100S)
112 psi (7.87 kg/cm
2
)
Maximum Drive Speed
3.25 mph (5.2 kph)
Max. Hydraulic System Pressure
4600 psi (317 Bar)
Maximum Wind Speed
28 mph (12.5 m/s)
Maximum Manual Force
400 N
Electrical System Voltage
12 Volts
Gross Machine Weight (1100SJP)
40,900 lb. (18,552 kg)
Gross Machine Weight (1100S)
39,800 lb. (18,053 kg)
Table 6-4. Chassis Specifications