JLG 1100SJP Operator Manual - Manual (Page 38)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-6 – JLG Lift – 3121255
10. Articulating Jib
This switch provides raising and lowering of the jib.
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR
SLIGHT LEVELING OF THE PLATFORM. INCORRECT USE COULD CAUSE
THE LOAD/OCCUPANT TO SHIFT OR FALL. FAILURE TO DO SO COULD
RESULT IN DEATH OR SERIOUS INJURY.
11. Platform Leveling Override
A three position switch allows the operator to adjust the
automatic self leveling system. This switch is used to
adjust platform level in situations such as ascending/
descending a grade.
12. Platform Rotate
A three position switch permits rotation of the platform.
13. Jib Swing (1100SJP Only)
A three position switch permits rotation of the jib and
platform.
Ground Control Indicator Panel
(See Figure 3-3., Ground Control Indicator Panel - 1100S and
Figure 3-4., Ground Control Indicator Panel - 1100SJP)
1. Battery Charging Indicator
Indicates a problem in the battery or charging circuit,
and service is required.
2. Low Engine Oil Pressure Indicator
Indicates that engine oil pressure is below normal and
service is required.
3. High Engine Temperature Indicator
Indicates that engine coolant temperature is abnormally
high and service is required.