JLG 1100SJP Operator Manual - Manual (Page 65)

SECTION 4 - MACHINE OPERATION
3121255 – JLG Lift – 4-11
4.8 PLATFORM
Platform Level Adjustment
NOTE: When the Boom Control Select Switch is in the Manual
mode, Platform leveling only functions during Main Lift
operation. When the Boom Control Select Switch is in the
Automatic mode, Platform Leveling is active during all
functions except during telescope operation. Also, when
in the Manual mode, the Controlled Angle system is not
active.
During normal operation of the machine, the platform will
automatically maintain it’s position. To manually Level Up or
Down - Position the Platform/Level control switch Up or
Down and hold until the desired platform position is
obtained.
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR
SLIGHT LEVELING OF THE PLATFORM. INCORRECT USE COULD CAUSE
THE LOAD/OCCUPANT TO SHIFT OR FALL. FAILURE TO DO SO COULD
RESULT IN DEATH OR INJURY.
Platform Rotation
To rotate the platform to the left or right, use the Platform
Rotate control switch to select the direction and hold until
desired position is reached.