JLG 3969electric Operator Manual - Manual (Page 33)

SECTION 4 - MACHINE OPERATION
3120880 – JLG Sizzor – 4-3
IF HIGH DRIVE SPEED CUT-OUT LIMIT SWITCH MALFUNCTIONS,
SHUT DOWN MACHINE AND HAVE AUTHORIZED SERVICE PER-
SONNEL REPAIR OR REPLACE LIMIT SWITCH PRIOR TO RESUM-
ING OPERATION.
Traveling Forward and Reverse
ENABLE SWITCH MUST BE DEPRESSED PRIOR TO ACTIVATING
ANY FUNCTION, OTHERWISE FUNCTION WILL NOT OPERATE.
1. If machine is shut down, turn Platform/Ground
Select switch to platform at Ground Control Station.
2. At Platform Controls, pull out Emergency Stop
switch and activate Enable switch.
3. Position Drive controller to forward or reverse as
desired. Angle of controller will determine travel
speed.
4.9 PARKING AND STOWING
NOTE: When parking battery powered units overnight, bat-
teries should be charged in accordance with instruc-
tions in Section 2 to ensure readiness for following
workday.
To shut down and park the machine, the procedures are
as follows:
1. Drive machine to a reasonably well protected area.
2. Ensure platform is fully lowered.
3. Position Platform/Ground Select switch to center off
and remove key to disable machine from unautho-
rized use.
4. If necessary, cover Platform Controls to protect
instruction placards, warning decals and operating
controls from hostile environment.
5. Chock at least two wheels when parking machine for
an extended period of time.
4.10 PLATFORM LOADING
The platform maximum rated load capacity is shown on a
placard located on the platform and is based upon the fol-
lowing criteria.
1. Machine is positioned on a smooth, firm and level
surface.
2. All braking devices are engaged.
3. Maximum capacity for each model is as follows:
3369 electric - 455 kg (1000 lb)
3969 electric - 340 kg (750 lb)
Figure 4-1. Grade and Sideslope