JLG 3969electric Operator Manual - Manual (Page 38)

SECTION 6 - EMERGENCY PROCEDURES
6-2 – JLG Sizzor – 3120880
3. Cranes, forklift trucks or other equipment which may
be available are to be used to remove platform
occupants and stabilize motion of the machine in
case machine controls are inadequate or malfunc-
tion when used.
Platform Caught Overhead
If the platform becomes jammed or snagged in overhead
structures or equipment, do not continue operation of the
machine from either the platform or the ground until the
operator and all personnel are safely moved to a secure
location. Only then should an attempt be made to free the
platform using any necessary equipment and personnel.
Do not operate controls to cause one or more wheels to
leave the ground.
Post-Incident Inspection
Following any accident, thoroughly inspect the machine
and test all functions first from the ground controls, then
from the platform controls. Do not lift above 3 m (10 ft)
until you are sure that all damage has been repaired, if
required, and that all controls are operating correctly.
6.5 INCIDENT NOTIFICATION
1. It is imperative that JLG Industries, Inc. be notified
immediately of any incident involving a JLG product.
Even if no injury or property damage is evident, the
Product Safety and Reliability Department at 1-877-
JLG-SAFE (1-877-554-7233) should be contacted by
telephone and provided with all necessary details.
2. It should be noted that failure to notify the Manufac-
turer of an incident involving a JLG Industries prod-
uct within 48 hours of such an occurrence may void
any warranty consideration on that particular
machine.